1/2" x 11 Link Marshall Chain Heavy Head 616 - Farming Agricultural Flailing Muck Spread Spreader

Designed for agricultural flailing and muck spreading, this Marshall Heavy Head Chain Assembly 616 is intended as a spare or replacement part for use in a Marshall machine. Supplied in a 1/2" x 11 link size, it is finished in zinc plating for a long-lasting coating.

A range of product codes is referenced with corresponding A–I measurements in millimetres, allowing you to match the correct assembly to your existing setup.

Key features

• Size: 1/2" x 11 link
• Finish: zinc plated
• Designed for agricultural flailing and muck spreading
• Suitable as a spare or replacement part for a Marshall machine
• Product code: SFFCP

Sizing

• SFFCL: A 76.5mm, B 16mm, C 49.5mm, D 555mm, E 12mm, F 44mm, G 16.5mm, H 41mm, I 67.5mm
• SFFCM: A 80.5mm, B 32mm, C 76mm, D 560mm, E 12mm, F 44mm, G 16.5mm, H 41mm, I 67.5mm
• SFFCN: A 76.5mm, B 16mm, C 49.5mm, D 610mm, E 12mm, F 49.5mm, G 17.5mm, H 42mm, I 73mm
• SFFCP: A 80.5mm, B 32mm, C 76mm, D 614mm, E 12mm, F 49mm, G 17.5mm, H 43mm, I 72mm
• SFFCR: A 76.5mm, B 16mm, C 49.5mm, D 640mm, E 14mm, F 38.5mm, G 19mm, H 46mm, I 65.5mm
• SFFCT: A 80.5mm, B 32mm, C 76mm, D 650mm, E 14mm, F 38.5mm, G 19mm, H 46mm, I 65.5mm

Please note

Due to previous storage conditions, this product may show rust or corrosion on certain parts.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.