Fixaball Drill Bits High Speed Steel Jobber HSS 2 Twist Flute 6mm - 13.0mm

For metal, wood and plastic drilling, these Fixaball HSS jobber drill bits are made from high speed steel and feature a 2 twist flute design for smooth material removal. A 120' cutting edge supports clean cutting performance across a range of workshop and general drilling tasks.

Suitable for engineers and DIY use, this range covers diameters from 5.2mm to 13.0mm, making it easy to select the required size for the job.

Available options

• 5.2mm
• 5.5mm
• 5.8mm
• 6.0mm
• 6.2mm
• 6.4mm
• 6.5mm
• 6.6mm
• 6.8mm
• 7.0mm
• 7.2mm
• 7.5mm
• 7.8mm
• 8.0mm
• 8.2mm
• 8.5mm
• 8.8mm
• 9.0mm
• 9.4mm
• 9.5mm
• 9.8mm
• 10.0mm
• 10.2mm
• 10.5mm
• 11.0mm
• 11.5mm
• 12.0mm
• 12.5mm
• 13.0mm

Key features

• High speed steel jobber drill bit
• 2 twist flutes
• 120' cutting edge
• Suitable for steel, wood and plastic

Care and maintenance

• Store drill bits separately to prevent them knocking into each other.
• Check chuck speed carefully, as excessive speed can overheat the bit and damage the cutting edge.
• Use a centre punch on the marked hole position before drilling.
• Secure the material firmly before starting for a clean and accurate cut.
• Drill at 90' to the material surface.

Safety information

• Wear goggles and protective clothing.
• Do not wear gloves.
• Remove flammable items from the surrounding area before use.
• When cutting metal, swarf can be ejected at a very high temperature.

Rackhams Reference : 398ZUNPABW