Fixaball SDS + Drill Bits Masonry Concrete Brick Block Stone Short and Long

For drilling into brick, block, stone and mortar, these Fixaball SDS + masonry drill bits are available in a wide range of diameters and lengths. Each bit features a high quality tungsten carbide tip and is also suitable for tiles when used with the hammer action switched off to help prevent cracking or damage.

With short and long options across multiple sizes, this range suits trade and general building work where an SDS + fitting is required for masonry drilling.

Key features

• SDS + masonry drill bits
• High quality tungsten carbide
• Suitable for brick, block, stone and mortar
• Can be used on tiles with the hammer function turned off
• Available in short and long lengths

Available options

• 4.0mm x 110mm
• 5.0mm x 110mm
• 5.0mm x 160mm
• 5.5mm x 160mm
• 5.5mm x 210mm
• 6.0mm x 110mm
• 6.0mm x 160mm
• 6.0mm x 200mm
• 6.0mm x 260mm
• 6.5mm x 110mm
• 6.5mm x 160mm
• 6.5mm x 250mm
• 8.0mm x 110mm
• 8.0mm x 160mm
• 8.0mm x 210mm
• 8.0mm x 260mm
• 8.0mm x 450mm
• 8.0mm x 600mm
• 10.0mm x 110mm
• 10.0mm x 160mm
• 10.0mm x 210mm
• 10.0mm x 260mm
• 10.0mm x 450mm
• 12.0mm x 160mm
• 12.0mm x 210mm
• 12.0mm x 260mm
• 12.0mm x 300mm
• 12.0mm x 450mm
• 12.0mm x 600mm
• 13.0mm x 160mm
• 13.0mm x 210mm
• 13.0mm x 260mm
• 14.0mm x 160mm
• 14.0mm x 210mm
• 14.0mm x 300mm
• 16.0mm x 210mm
• 16.0mm x 260mm
• 18.0mm x 200mm
• 18.0mm x 450mm
• 20.0mm x 300mm
• 20.0mm x 370mm
• 20.0mm x 450mm
• 22.0mm x 250mm
• 22.0mm x 450mm
• 24.0mm x 260mm

Safety information

When drilling tiles, switch off the hammer action to help prevent cracking or unwanted damage.

Rackhams Reference : P26KJKP4G9