Galvanised Straining Rigging Screw Jaw Jaw 64MM (Closed Body Turnbuckle Wire Rope Tensioner)

Designed for controlled tensioning, the Galvanised Jaw & Jaw Rigging Screw is a practical choice for tightening wire rope across a wide range of settings. With jaw-and-jaw ends and a galvanised finish, it suits engineering and construction work where reliable adjustment is required, while also lending itself to on-board boat use and caravan applications such as tethering a vehicle.

Available in multiple sizes from 6MM up to 64MM, this rigging screw can be selected to match the scale of your project, whether you are setting up, securing or maintaining tensioned wire rope runs.

Key features

• Galvanised rigging screw with jaw & jaw ends
• Suitable for adding tension to wire rope
• Ideal for engineering and construction applications
• Suitable for use on board boats
• Suitable for caravan industry use, including tethering a vehicle
• Sizes available from 6MM to 64MM

Sizing

• 6MM: A 6MM, B 105MM, C 144MM, D 5.7MM, E 8MM, F 225MM
• 8MM: A 8MM, B 118MM, C 168MM, D 8MM, E 11MM, F 250MM
• 10MM: A 10MM, B 137MM, C 192MM, D 9MM, E 12MM, F 300MM
• 12MM: A 12MM, B 167MM, C 245MM, D 12MM, E 14MM, F 375MM
• 16MM: A 16MM, B 213MM, C 325MM, D 16MM, E 17MM, F 480MM
• 20MM: A 20MM, B 235MM, C 435MM, D 24.5MM, E 25MM, F 655MM
• 22MM: A 22MM, B 300MM, C 510MM, D 24.5MM, E 25MM, F 790MM
• 25MM: A 25MM, B 310MM, C 540MM, D 31MM, E 31.5MM, F 800MM
• 32MM: A 32MM, B 380MM, C 725MM, D 37MM, E 39MM, F 1100MM
• 38MM: A 38MM, B 405MM, C 850MM, D 47MM, E 49MM, F 1200MM
• 44MM: A 44MM, B 405MM, C 875MM, D 54MM, E 54MM, F 1270MM
• 52MM: A 52MM, B 420MM, C 890MM, D 63MM, E 63MM, F 1350MM
• 64MM: A 64MM, B 410MM, C 910MM, D 64MM, E 64MM, F 1370MM