Liqui Moly PRO-LINE OIL Stop Leak 1L Sealer Treatment Reduces Oil Consumption

From Liqui Moly, Pro-Line Oil Leak Stop is a 1 litre engine oil additive formulated for gasoline and diesel engines, including vehicles with and without diesel particulate filter (DPF). It can be mixed with all commercially available motor oils and is suitable for use where rejuvenation of rubber and plastic engine seals is required.

The formula works on engine seals including shaft sealing rings and valve stem seals. It reduces oil consumption over piston rings due to constant viscosity and via valve guides through regenerated seals, while compensating for loss of viscosity and dampening engine noise. Sealing first takes effect after about 600 to 800 km of driving.

Key features

• 1 litre contents
• Suitable for all gasoline and diesel engines with and without diesel particulate filter (DPF)
• Can be mixed with all commercially available motor oils
• Rejuvenates rubber and plastic engine seals including shaft sealing rings and valve stem seals
• 1 l is sufficient for 15 l of motor oil

How to use

• Contents of the can (1 liter) are sufficient for up to 15 liters of motor oil
• The product can be added at any time
• After adding, run the engine until warm or drive the vehicle
• Sealing first takes place after about 600 to 800 km of driving
• To guarantee a lasting effect, use the additive again after each oil change

Safety information

Not suitable for use in motorcycles with wet clutches!

About this product

Who is it for

Suited to drivers of gasoline and diesel vehicles using motor oil additives to address oil consumption linked to engine seals.

When and where to use it

Suitable for use during routine vehicle maintenance and can be added to the motor oil at any time before driving the vehicle until warm.

Rackhams Reference : D3S7RP4J83