magicvision.uk Audio Technica ATN95E Replacement Needle

Audio-Technica’s ATN95E replacement stylus is made for use with the AT95E phono cartridge, offering a straightforward way to renew a compatible turntable setup. This replacement needle uses a 0.3 × 0.7 mil bonded elliptical diamond stylus with an aluminium pipe cantilever.

Suitable for the Audio-Technica AT95E, AT93 and certain discontinued AT95 cartridges, it is fitted directly to a compatible cartridge body. The stylus is finished in green and retains the detailed specification associated with the AT95E platform, including a frequency response of 20 Hz – 20 kHz and a recommended tracking force of 2.0 g.

Key features

• Compatible with Audio-Technica AT95E cartridges
• Additional compatibility with Audio-Technica AT93 and certain discontinued AT95 cartridges
• 0.3 × 0.7 mil bonded elliptical diamond stylus
• Aluminium pipe cantilever
• Tracking force range: 1.5–2.5 g
• Recommended tracking force: 2.0 g
• Vertical tracking angle: 20
• Green stylus
• Direct replacement on a compatible cartridge body
• Model number: ATN95E

Specifications

Stylus

• Stylus type: Bonded elliptical diamond
• Stylus dimensions: 0.3 × 0.7 mil
• Cantilever: Aluminium pipe
• Vertical tracking angle: 20
• Tracking force: 1.5–2.5 g
• Recommended tracking force: 2.0 g

Audio

• Frequency response: 20 Hz – 20 kHz
• Channel separation: 20 dB at 1 kHz
• Channel balance: 2.0 dB at 1 kHz
• Output voltage: 3.5 mV at 1 kHz, 5 cm/sec

Electrical

• Recommended load impedance: 47 kΩ
• Recommended load capacitance: 100–200 pF
• Coil impedance: 2.8 kΩ
• DC resistance: 410 Ω
• Coil inductance: 400 mH

Compliance

• Static compliance: 20 × 10⁻⁶ cm/dyne
• Dynamic compliance: 6.5 × 10⁻⁶ cm/dyne at 100 Hz
• Colour: Green

In the box

1 × Audio-Technica ATN95E Replacement Stylus

Rackhams Reference : 1II5KWTJZ6