Motul 8100 ECO-LITE 0W20 Fully Synthetic Engine Oil GM dexos1 GEN3

MOTUL 8100 ECO-LITE 0W-20 is a 100% synthetic gasoline engine lubricant formulated for modern petrol engines, including turbocharged and direct injection systems. This low viscosity SAE 0W-20 oil is suitable where fuel economy lubricants with low HTHS (≥ 2.6 mPa.s) are required, and it is recommended for vehicles requiring API SP, API SQ, ILSAC GF-6A or GF-7A standards.

It is particularly suited to GM vehicles requiring dexos1 Gen3, including Buick, Cadillac, Chevrolet, GMC, Opel and Vauxhall. The formulation is also suitable for engines running on petrol, LPG, CNG and ethanol blends up to E85, and it is compatible with catalytic converters and modern emission systems. It can be mixed with synthetic or mineral oils. Always check the vehicle handbook for the correct specification before use and follow the manufacturer’s recommended drain intervals.

Key features

• 100% synthetic formulation
• SAE 0W-20 viscosity grade
• Suitable for modern gasoline engines, including turbocharged and direct injection systems
• Recommended for API SP, API SQ, ILSAC GF-6A and GF-7A requirements
• Suitable for fuel economy lubricants with low HTHS (≥ 2.6 mPa.s)
• Compatible with catalytic converters and modern emission systems
• Suitable for petrol, LPG, CNG and ethanol blends up to E85

Specifications

• Density at 20C: 0.842
• Viscosity at 40C: 45.2 mm²/s
• Viscosity at 100C: 8.4 mm²/s
• HTHS viscosity (150C): 2.6 mPa.s
• Viscosity Index: 162
• Pour point: -42C / -44F
• Sulphated Ash: 0.84% wt
• TBN: 8.40 mg KOH/g
• Flash point: 223C / 433F

Vehicle compatibility

• Buick vehicles requiring GM dexos1 Gen3
• Cadillac vehicles requiring GM dexos1 Gen3
• Chevrolet vehicles requiring GM dexos1 Gen3
• GMC vehicles requiring GM dexos1 Gen3
• Opel vehicles requiring GM dexos1 Gen3
• Vauxhall vehicles requiring GM dexos1 Gen3

Compliance and regulatory information

• Meets API SP / API SQ standards
• Recommended for ILSAC GF-6A / GF-7A requirements
• GM dexos1 Gen3 backward compatible
• Chrysler MS-6395
• Ford WSS-M2C947-A / M2C947-B1 / M2C962-A1
• Fiat 9.55535-CR1

How to use

• Always refer to the vehicle handbook before use
• Follow the manufacturer’s recommended drain intervals
• Can be mixed with synthetic or mineral oils
• Check the vehicle handbook for the correct specification before use

About this product

Who is it for

Suited to drivers of modern petrol vehicles, including turbocharged and direct injection engines, where SAE 0W-20 and dexos1 Gen3 specifications are required.

When and where to use it

Suitable for routine engine servicing where the vehicle handbook specifies API SP, API SQ, ILSAC GF-6A, GF-7A or GM dexos1 Gen3 performance levels.

Rackhams Reference : FTGFRW747U