Oxford Oximiser Pro 1250

From Oxford, the Oximiser Pro 1250 Battery Optimiser is designed for professional use, automatically charging, maintaining and optimising your battery. It supports 6V and 12V batteries with a maximum charge rate of 1300mA (1.3Amps), using an intelligent 8-stage automatic programme to charge safely to the optimum voltage before switching to maintain mode.

Charging programmes are tailored to the selected battery type, with compatibility across WET/MF, AGM, GEL and LiFePO4 batteries. A desulfation stage is included within the charging profile to repair damaged batteries automatically (not LiFePO4). Built for use in any environment, the high impact, fire resistant ABS casing is ultrasonically sealed to achieve an IP65 rating, while a clear LCD display guides you through the charging stages. For flexible placement, a removable hanger allows the charger to be clipped on and lifted off the ground when required.

Key features

• Maximum output 1300mA (1.3Amps)
• 8-stage automatic charging programme including polarity test, analyse, soft start, bulk, absorption, voltage check and maintain mode
• Desulfation stage for 12V WET/MF, AGM and GEL batteries (not LiFePO4)
• Compatible with 6V and 12V WET/MF, AGM and GEL batteries, plus 12V LiFePO4
• AH capacity: 3.5AH - 40AH
• IP65 rated, suitable for indoor and outdoor use
• High impact, fire resistant ABS casing with rear fitted rubber feet and waterproof cable exit with strain relief
• Clear, easy-to-read LCD display

What's included

Includes a set of 2-in-1 Croc-O-Ring leads with an SAE connector.

Rackhams Reference : NUQBE8VL4V