Panel Haus Premium 3-sided Wood Veneer Grey Oak Acoustic Slat Wall Panel - 240cm x 32cm (2 pack)

Bringing together decorative wall panelling and sound control, the Panel Haus Premium 3-sided Wood Veneer Grey Oak Acoustic Slat Wall Panel is designed to give interiors a clean, architectural finish while helping to reduce echo and reverberation. Suitable for both walls and ceilings, this Panel Haus design pairs a real wood veneer with high-performance acoustic felt for a more considered look and feel in living spaces, home offices and workplaces.

Each panel features a 3-sided wood veneer wrap for a seamless appearance, while the wide panel format can help cover minor surface marks such as cracks, chips or screw holes. Designed for straightforward fitting, Panel Haus acoustic slat panels can be bonded directly to the wall or fixed through the felt backing with screws. Ongoing care is simple, with no oiling required.

Key features

• Real wood veneer wrapped on 3 sides
• High-performance acoustic felt backing
• Reduces echo and reverberation
• Suitable for walls and ceilings
• Produced using recycled materials
• Class-A acoustic rating
• 2 panels

Sizing

• Each panel: 2400mm H x 320mm W x 22mm D
• Total size: 2400mm H x 640mm W x 22mm D
• Each slat: 2400mm H x 27mm W x 12mm D
• Felt depth: 10mm
• Gap between slats: 13mm
• Panel coverage: 1.53m²
• Slats per panel: 8
• Panel weight: 10kg

Installation

• Prepare the wall before fitting
• Measure and cut panels to size as needed
• Bond directly to the wall with grab adhesive, or fix through the felt backing using 35mm x 3.5mm screws
• Cut across the width with a fine-toothed handsaw, or slice the felt vertically with a sharp utility knife
• For A-rated sound performance, install on a 50mm batten and fill the void with sound-absorbing insulation

Care

Wipe with a damp cloth or vacuum lightly. No oiling is required.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : GV3358PKFR