S-FIXX BLACK-OUT 3-in-1 Rust Converter, Primer & Protective Paint

For maintenance and refurbishment work, S-FIXX BLACK-OUT combines rust conversion, priming and protective painting in one water-based coating. Suitable for prepared iron and steel, it reacts with remaining firmly attached rust as part of the coating process, then dries to a satin black finish.

BLACK-OUT also acts as a decorative and protective coating on compatible non-rusting surfaces including wood, aluminium, copper, certain plastics, carbon fibre, ceramics, stone, brick and glass. Once cured, the coating remains flexible, making it suitable for projects such as gates, railings, garden furniture, brackets, hinges and decorative metalwork.

Key features

• 3-in-1 formula: rust converter, primer and protective paint
• Satin black finish
• Water-based formulation
• Flexible coating when cured
• Suitable for prepared iron and steel with remaining firmly attached rust
• Compatible with wood, aluminium, copper, certain plastics, carbon fibre, ceramics, stone, brick and glass
• Typical touch-dry time: approximately 30 minutes
• Made in the UK

Specifications

• Finish: Satin
• Colour: Black
• Typical full cure: approximately 24 hours, depending on conditions
• Rust-converting use: suitable prepared iron and steel surfaces
• Other compatible materials: wood, aluminium, copper, certain plastics, carbon fibre, ceramics, stone, brick and glass

Care and maintenance

• Store according to the instructions on the packaging.
• Check the product label before use for surface suitability, preparation requirements and application conditions.

Safety information

• Remove loose rust, flaking paint, dirt, grease and other contamination before application.
• Existing coatings must be firmly attached.
• Repair or replace structurally weakened components before painting.
• Test a small, inconspicuous area before treating an unfamiliar surface.
• Follow the product instructions for coverage, coating thickness, number of coats and recoating intervals.
• Avoid spreading the coating too thinly to increase coverage.
• For outdoor projects, protect the fresh coating while it dries and cures.
• Allow the finish to cure before putting the item back into service.

Rackhams Reference : H3GRT5MEFQ