S-FIXX No Gun Adhesive, Sealant & Wall Filler – 3-in-1 Grab Adhesive

For repairs, sealing work and surface filling, S-FIXX S-BOND is a 200ml hybrid polymer product that combines adhesive, sealant and filler in one no-gun pack. It suits smaller maintenance jobs around the home and garden where a separate sealant gun is not required.

The formula can be applied in wet conditions and underwater on suitable surfaces, and it can be painted once fully cured. After full cure under the specified application conditions, it can support loads of up to 100kg.

Key features

• Hybrid polymer adhesive, sealant and filler
• 200ml pack
• No separate sealant gun required
• Suitable for use in wet conditions and underwater on compatible surfaces
• Paintable, including with water-based paint
• VOC Free
• Holding strength: up to 100kg after full cure under the specified application conditions
• Never moulds

Care and maintenance

Always follow the instructions on the packaging for storage.

Safety information

• Check suitability for both materials before application.
• Remove dust, grease, loose coatings and other contamination before use.
• Allow the product to cure fully before applying loads, painting or putting the repair into service.
• Heavy or vertically mounted items may require temporary support while the adhesive cures.
• Follow the packaging instructions for the conditions associated with the stated holding strength.
• Test paint compatibility on a small area before overpainting.

Rackhams Reference : BWFWDE81QZ