Turbo Nozzle / Spinning Jet Brass 4000 PSI / 280 bar for Pressure washer

Built for demanding cleaning jobs, this turbo nozzle pressure washer accessory uses a spinning jet to tackle stubborn build-up on hard surfaces. The Turbo Nozzle / Spinning Jet Brass suits heavy dirt and grime on flooring, and is also used for lifting flaking paint from brickwork.

Designed for broad compatibility, it fits standard lances with a 1/4” male threaded end or a 1/4" (11.6mm) quick release outlet. Maximum pressure is rated at 4000 PSI (280 bar) at 100°C.

Key features

• Spinning jet turbo nozzle design
• Suitable for removal of heavy dirt and grime from flooring
• Used for removal of flaking paint from brickwork
• Brass construction
• Fits standard lances with 1/4” male threaded end
• Fits 1/4" (11.6mm) quick release outlet

Specifications

• Maximum pressure: 4000 PSI (280 bar) at 100°C

Typical use cases

• Flooring where heavy dirt and grime needs removing
• Brickwork with flaking paint
• Block paving
• Removal of moss and green algae

Nozzle size selection guide

Use a pressure washer nozzle size chart to select the correct nozzle for your pressure washer. Example: for a pressure washer rated at 100 bar and 11 litres/min, start at the 100 bar column and move down to the number nearest 11 (11.3), then select the green column shown as a 05 nozzle. Choose the angle spray pattern that best suits your needs.

Note: pressure conversion. To convert PSI to bar, divide the PSI value by 15.

Rackhams Reference : LXKR6BD3GJ