8MM Wire Rope Grips x10 - DIN741 Galvanised Commercial Clamp Bulldog Clip

x10 8MM Galvanised Commercial Wire Rope Grip DIN741

Suits 8MM Wire Rope

Finish - Galvanised

Quantity - 10

Our Wire Rope Grips, manufactured from mild steel with a galvanised coating for corrosion resistance, are suitable for use on board boats in a rigging setup, or similar applications on land. The main use of these grips is to create loops of wire in a rope assembly, or when a temporary join is needed. The galvanised finish gives excellent corrosion resistance.

Measuement:

A(MM) - 19

B(MM) - 10

C(MM) -14. 5

D(MM) - 5. 5

E(MM) - 32. 5

F(MM) - 13. 5

G(MM) - 28

Notes on assembly and use.

1 - Prior to fitting, the threads on the nuts and bolts should be well greased. 2 - Spacing between the grips should be at least 6 times the diameter of the rope. 3 - Ensure the grip is always orientated correctly, the 'u' bolt should placed on the unloaded end of the rope. 4 - Tighten each nut evenly and in turn to achieve the recommended torque settings. 5 - Leave unused for 24 hours and check torque setting again, re-tighten if necessary. 6 - After first application of the load, re-check torque setting, re-tighten if necessary. 7 - During service periodically check the torque setting. Weight : 0. 28KG Product Code : SFCOMG08