Arbor Garden Solutions Square Pergola And Decking Kit With One Side Balustrade

Create a defined outdoor zone with the Arbor Garden Solutions Square Pergola And Decking Kit With One Side Balustrade, a coordinated pergola and decking kit designed around pre-cut components and step-by-step instructions. The structure combines a pergola frame with decking to form a level walking surface that connects areas of your garden or patio, while the single-side balustrade adds a considered finishing detail.

Materials are specified throughout, including CLS C16 Scandinavian Pine for rafters and braces, engineered uprights in 94x94 redwood ‘A’ quality (kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified), and 32mm x 125mm grooved decking boards that are green treated and FSC certified. Assembly hardware is supplied, with instructions provided by email 24-hours before delivery or available to download.

Key features

• Square pergola and decking kit with one side balustrade
• Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm)
• Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm)
• Engineered uprights in 94x94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4
• Upright posts supplied at 2.7m and can be trimmed for a free-standing structure
• Decking boards: 32mm x 125mm, grooved, green treated, FSC certified
• Uprights are 70% PEFC certified
• All necessary hardware for assembly is included

What's included

• All necessary hardware for assembly

How to assemble

• Prepare the area by ensuring a flat, level surface before assembling the frame
• Assemble the decking frame by securing the joists, beams, and decking planks, using the spacer block to maintain spacing
• Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via pre-drilled holes using the included fixings
• Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed
• Tools required: electric screwdriver, drill, socket wrench, spirit level, ladder, 10mm socket and screwdriver

Treatment & maintenance

Natural timber can vary in colour from images shown. Sweep regularly to remove debris, then clean every few months using mild soap and water with a soft-bristle brush; avoid high pressure-washer settings. Inspect at least once a year for loose fasteners or cracked boards and tighten or replace as required. Apply a wood sealant or stain every 1-3 years; a water-sprinkle test can be used to check if resealing is needed (if water absorbs quickly, apply a new coat). In winter, clear snow with a plastic shovel and avoid harsh de-icing salts.

Support & warranty

Lifetime warranty covers manufacturing faults.

Please note

The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Natural timber products may vary in colour and grain from images shown.

Rackhams Reference : MP1GXN97NY