Clarke International Clarke HSEC651A 2" 665W 290Lpm 9.5m Head Industrial Submersible Water Pump (110V)

For demanding site drainage and wastewater handling, Clarke’s HSEC651A industrial submersible water pump pairs a 665W, 110V motor with a 2” (50mm) outlet. A maximum flow rate of 290 l/min and a maximum head of 9.5m support efficient water movement where dependable pumping performance is required.

Designed for difficult water conditions, it can pump small solids in suspension and uses a twin seal arrangement with a TCT cutting plate and steel waste cutter. A robust cast iron base with filter supports durability, while the fitted float switch enables automatic stop/start operation. Supplied with a 2” (50mm) outlet hose connector and 10m of H07RNF cable.

Key features

• 665W, 110V motor with 2” (50mm) outlet
• Maximum flow rate 290 l/min
• Maximum head (lift height) 9.5m
• Pumps small solids in suspension
• Twin seals with TCT cutting plate and steel waste cutter
• Cast iron base with filter
• Float switch for automatic stop/start operation
• Supplied with 2” (50mm) outlet hose connector and 10m of H07RNF cable

Specifications

• Product type submersible pump
• Model name/number Hsec651a
• Power voltage supply 110V
• Power 665 watts
• Maximum flow rate (l/h) 2902.00
• Product height (MM) 420.00
• Product width (MM) 240.00
• Product weight 17.00
• Cable length 10.00
• Float switch float switch
• Resistant to rust resistant to rust
• Pack quantity 1
• Plug included does not include plug
• Contains wood and/or paper no
• FSC or PEFC certified yes

What's included

• 2” (50mm) outlet hose connector
• 10m of H07RNF cable

Rackhams Reference : GR7PFD9ZTG