Fixaball M6 Drop In Anchor Masonry Concrete

For flush fixing into solid concrete, brick and masonry, this Fixaball M6 drop in anchor provides an internally threaded expansion anchor with a zinc plated finish. It accepts bolts or threaded rod of any length and is suitable for applications including mechanical and electrical services, suspension systems, cable trays, signs and hand rails.

Once installed, the anchor remains in place when the fixture is removed. Full expansion is achieved with the correct shouldered setting punch, with stamp marks and a visual check on the setting tool to confirm complete expansion.

Key features

• Internal thread diameter: M6
• Zinc plated
• Internally threaded socket anchor
• Suitable for solid concrete, brick, masonry and non-porous stone
• Flush fitting with no protrusion when not in use
• Compatible with bolts, screws, studs and threaded rod

Specifications

• Anchor hole size: 8mm
• Anchor length: 25mm
• Minimum hole depth: 25mm
• Internal thread length: 10mm
• Masonry drill diameter: 8
• Hole depth: 26
• Minimum screw embedment: 11

Sizing

25mm

Safety information

• Use a hammer drill with a carbide tipped masonry drill bit matched to the outside diameter of the anchor.
• Clear the hole of debris with a brush and blow out pump before installation.
• Tighten to the recommended torque using a torque wrench.
• All specifications are true with correct installation.

Rackhams Reference : 5GHML2Z6R5