Gr8 Garden Manual Pole Saw 2in1 Extendable Tree Pruner 7.3-27 ft Fiberglass Pole Scissors

For routine pruning across different heights, the Gr8 Garden Manual Pole Saw 2in1 Extendable Tree Pruner combines long-reach cutting with close-up control in one adaptable tool. It works as a pole saw for higher branches, then converts to a detachable hand saw when you need a more direct cutting position.

An extendable pole supports a wide range of working heights, adjusting from 7.3 to 27 ft (2.24 m to 8.24 m). Built with a fibreglass + aluminium pole and a rust resistant and durable carbon steel cutter, it is designed for trimming branches and general tree care. A double lock design uses double-lock joints for firm, effortless locking, and the pole reduced weight by 10% for extended use.

Key features

• Manual 2-in-1 design switches between pole saw and detachable hand saw use
• Adjustable length from 7.3 to 27 ft (2.24 m to 8.24 m)
• Double lock design with double-lock joints for firm locking
• Hook cutter on top removes twigs when pulled back
• Hook cutter on the bottom helps remove stuck branches during cutting and trimming
• Pruning shears for small 10mm diameter branches with two modes to choose from on demand

Specifications

General

• Colour: Grey & Black

Materials

• Cutter material rust resistant and durable carbon steel
• Pole: Fiberglass + Aluminium
• Blade carbon steel thickness: 0.05" / 1.2 mm
• Blade coating: teflon coating

Reach

• Ranging from 7.3 to 27 ft (2.24 m to 8.24 m)

What's included

• 3 cutters
• 1 sharp scissor

Typical use cases

• Trimming hard-to-reach branches using the long-reach pole saw format
• Cutting main branches with the pruning saw
• Cutting small 10mm diameter branches with the pruning shears

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.