Handrails Direct Kineton Matt Black Half Turn Handrail

Built for staircases with a full 180-degree turn at a landing, the Handrails Direct Kineton half turn handrail system brings together the components needed to create a continuous run across straight sections and corners. The matt black finish gives the Kineton range a defined, architectural look that sits particularly well in modern interiors.

Designed for half landing layouts that turn left or right, this system is suited to larger staircase runs and can be cut to size where needed using a fine toothed hacksaw. Handrails Direct has specified four adjustable elbows to help follow changes in direction with greater accuracy, while compatibility with all 40mm Kineton handrail components allows the system to integrate with the wider range.

Key features

• Designed for staircases with a half landing and two straight runs
• Supports half landing staircases turning left or right
• Matt black finish
• Four adjustable elbows for corners and changes in direction
• Compatible with all 40mm Kineton handrail components
• Can be cut to size using a fine toothed hacksaw 24 to 32 TPI

Sizing

• Up to 8.4 metres
• 2800mm floor to floor height
• 1.2 metre handrail poles

What's included

• 7 x 1.2 metre handrail poles
• 10 x wall brackets
• 3 x connecting brackets
• 4 x adjustable elbows
• 2 x end caps

Installation

Suitable for half landing staircases with a complete 180-degree turn. If your staircase is under 8.4 metres, the poles can be cut to size using a fine toothed hacksaw 24 to 32 TPI.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : M2P2ULITTC