Motul 8100 Power 5W-40 Fully Synthetic Ester Engine Oil Petrol Diesel API SP

Motul 8100 Power 5W-40 from Motul is a 100% synthetic ester engine oil for high-performance petrol and diesel engines. This SAE 5W-40 formulation suits naturally aspirated or turbocharged engines with direct or indirect injection, and is intended for demanding driving conditions across a wide range of engine speeds and temperatures, including road and racing use.

Suitable for petrol and diesel engines requiring an SAE 5W-40 oil meeting API SP, it is also compatible with biofuels including E85 and with exhaust after-treatment systems such as catalytic converters. The formulation helps protect downsized petrol engines against low-speed pre-ignition (LSPI). It can be used in engines running on leaded or unleaded petrol, ethanol, LPG, diesel and biofuels, subject to the vehicle manufacturer’s requirements.

Key features

• 100% synthetic ester formulation
• SAE 5W-40 viscosity grade
• Meets API SP
• Suitable for high-performance petrol and diesel engines
• For naturally aspirated or turbocharged engines with direct or indirect injection
• Compatible with biofuels, including E85
• Compatible with catalytic converters
• Can be mixed with synthetic or mineral engine oils

Specifications

• Density at 20C: 0.845
• Kinematic viscosity at 40C: 87.1 mm²/s
• Kinematic viscosity at 100C: 14.7 mm²/s
• HTHS viscosity at 150C: 3.9 mPa·s
• Viscosity index: 177
• Pour point: −48C
• Sulphated ash: 0.79% by weight
• Total base number (TBN): 7.9 mg KOH/g
• Flash point: 236C

How to use

• Follow the vehicle manufacturer’s recommended oil change interval and adjust it according to how the vehicle is used
• Always consult the vehicle owner’s manual before use

Compliance and regulatory information

Standard: API SP

Safety information

• This type of oil may be unsuitable for some engines, so check the owner’s manual before use
• Suitable for engines running on leaded or unleaded petrol, ethanol, LPG, diesel and biofuels, subject to the vehicle manufacturer’s requirements

About this product

Who is it for

Suited to drivers of high-performance petrol and diesel vehicles requiring SAE 5W-40 oil meeting API SP, including naturally aspirated or turbocharged engines with direct or indirect injection.

When and where to use it

Suitable for demanding driving conditions across a wide range of engine speeds and temperatures, including road and racing use.

Rackhams Reference : DYC7HZSAZR