SYNTOL Pin & Bush Grease Cartridge 400g Heavy-Duty Lithium Grease with PTFE, NLGI No.2, -30°C to +140°C

From SYNTOL, this pin and bush grease cartridge provides a 400g supply of lithium-thickened, mineral oil-based grease fortified with PTFE. Formulated to NLGI No. 2 consistency, it is intended for plain pin and bush connections in industrial and mobile equipment, where a multi-purpose grease is required for heavy-duty use.

The formulation includes extreme pressure and oxidation-resistant additives, with a stated operating temperature range of -30°C to +140°C. It is also described as resistant to wear, water washout and oxidation. For application, the cartridge is used with a standard 400g grease gun after removing the ring pull and end cap.

Key features

• 400g cartridge
• Lithium-thickened, mineral oil-based grease
• Fortified with PTFE
• NLGI No. 2 consistency
• Suitable for plain pin and bush connections
• For heavy-duty industrial and mobile applications

How to use

• Remove the ring pull and end cap before inserting the cartridge into a standard 400g grease gun
• Before first-time use, check equipment manufacturer recommendations and ensure compatibility with previously used greases
• If required, purge bearings or grease points to avoid cross-contamination
• Avoid over-application
• Consult your grease supplier for further guidance if necessary

Specifications

• Operating temperature range: -30°C to +140°C
• Contains extreme pressure and oxidation-resistant additives
• Resistant to wear, water washout and oxidation

Rackhams Reference : 587KXPDY6C