T-Mech 2-Stroke Petrol Hammer Drill

From T-Mech, this 2-stroke petrol Hammer Drill Breaker is designed for demanding concrete and masonry work, switching between drilling and demolition to suit the job in hand. A simple operating mode switch lets you move from boring holes in stone and concrete to chiselling and breaking up concrete, brick, stone or hardened ground.

Powered by a 0.9kW, 32.6CC single-cylinder, air-cooled engine, it delivers a maximum speed of 7500rpm and peak torque of 1.45 N.m at 5000rpm. An adjustable handle supports a more comfortable grip, while the trigger allows speed adjustments for added control. With petrol power, you can work without being restricted by cords, making it a practical choice for renovation and demolition tasks.

Key features

• 2-stroke petrol Hammer Drill Breaker with drill and demolition hammer modes
• Operating mode switch for drilling or chiselling
• 0.9kW, 32.6CC single-cylinder, air-cooled engine
• Maximum speed: 7500rpm
• Peak torque: 1.45 N.m at 5000rpm
• Adjustable handle and variable-speed trigger
• Fuel tank capacity: 1L

Specifications

• Colour: black and red
• Weight: 10.5kg
• Power: 0.9kW
• Impact frequency: 800–2800 BPM
• Consumption rate: 500g/Kwh
• Fuel: petrol and 2 stoke engine oil
• Oil capacity: 0.08L
• Displacement capacity: 32.6CC, single-cylinder

Sizing

• 360mm / 36cm / 14.2” H
• 270mm / 27cm / 10.6” W
• 630mm / 63cm / 24.8” D
• Chisel: 18mm x 350mm
• Bit: 30mm x 400mm

What's included

• 1 x Heavy Duty Hammer Drill
• 2 x Drill attachments: 18mm x 350mm chisel and 30mm x 400mm bit
• 1 x Practical tool kit (grease and assembly tools)

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : AKNXWNAZLM