Turbo Nozzle / Spinning Jet 4000 PSI / 280 bar for Pressure washer

Designed for tackling stubborn outdoor cleaning, the Turbo Nozzle / Spinning Jet brings a rotating spray action to pressure washer set-ups where extra cutting power is required. It suits demanding jobs on hard surfaces, helping to lift heavy dirt and grime from flooring and delivering strong results on block paving.

With a maximum pressure rating of 4000 PSI (280 bar) at 100°C, it is also suitable for jobs such as removing flaking paint from brickwork and clearing moss and green algae. Fitment is straightforward, with compatibility for standard lances featuring a 1/4” male threaded end or a 1/4" (11.6mm) quick release outlet.

Key features

• Turbo nozzle with spinning jet action
• Max. pressure 4000 PSI (280 bar) at 100°C
• Fits standard lances with 1/4” male threaded end
• Fits 1/4" (11.6mm) quick release outlet
• Rubber outer sleeve colour may vary

Specifications

• Maximum pressure: 4000 PSI (280 bar)
• Maximum temperature: 100°C
• Connection: 1/4” male threaded end
• Connection: 1/4" (11.6mm) quick release outlet

Typical use cases

• Removal of heavy dirt and grime from flooring
• Cleaning block paving
• Removal of moss and green algae
• Removing flaking paint from brickwork

Nozzle size selection guide

Use the nozzle size chart to select the correct nozzle for your pressure washer. Example: for a pressure washer rated at 100 bar and 11 litres/min, start at the 100 bar column and move down to the number nearest 11 (11.3). Then refer to the green column, which is a 05 nozzle, and choose the spray angle that best suits your needs.

Pressure conversion: to convert PSI to bar, divide the PSI value by 15.

Rackhams Reference : WHL8FYMBUX