WRX White Surface Primer Spray Paints 400ml

For surface preparation and undercoating, WRX White Surface Primer Spray Paint is supplied in a 400 ml aerosol format for even spray application. It is applied to clean surfaces free from grease, dust, loose particles, old paint layers, rust and humidity, using short, even bursts from a distance of 25-30 cm.

Two light coats are applied in a double-cross pattern, with 3-5 minutes between coats. This primer suits both trade and home decorating use where controlled aerosol application and defined drying times are required.

Key features

• Primer spray paint in white
• Net content: 400 ml
• Coverage: 2.5-3 square meters with a single coat, depending on the assortment
• Application: apply two light coats in a double-cross pattern
• Drying time: touch-free in 5-20 minutes, fully dry in 8-12 hours, resistance to abrasions and chemicals in 24 hours
• Advanced nozzle with 50-50 paint-gas mix and MICROMIST nozzle design
• Patented childproof safety cap

Specifications

• Scent: Typical Solvent
• Gloss: From 7 to 92 Gloss
• Density at 20C: 0.75 ÷ 0.80 g/ml
• Pressure at 20C: 4.0 ± 0.5 bar
• Pressure at 50C: 8.0 ± 0.5 bar
• Viscosity Ford Cup 4: From 11’’ to 12.5’’
• Remaining Dry Cylinder: From 12% to 23.8%
• Thickness 1 Hand: 11 Micron
• Thickness 3 Hands: 32 Micron
• Temperature Resistance: 100-120C
• Appearance: Can containing pressurized liquid
• Grit to grindometro: From 0 to 2 Micron
• Flash Point: < 0C
• Supply Specifications: 15 bar foil-coated can

Care and maintenance

If paint remains after use, turn the bottle upside down and press the dispersion valve until it loosens before storing for future use.

Safety information

• Highly pressurised container.
• No smoking during storage or handling.
• Keep in a well-ventilated place.
• Avoid direct exposure to sunlight.
• Do not expose to naked flames.
• Keep out of reach of children with the childproof safety cap engaged.

Rackhams Reference : 1LUKTKIKXD