11MM Wire Rope Grips x10 - DIN741 Galvanised Commercial Bulldog Clamp

Designed for rigging and rope assemblies, these 11mm galvanised commercial Wire Rope Grips (DIN741) provide a practical way to form loops in wire rope or create a temporary join when required. Supplied in a pack of 10, each grip is finished in galvanised mild steel to help improve corrosion resistance, making it suitable for use on board boats as well as for similar applications on land.

For best results, correct fitting and ongoing checks are essential. The grip should be oriented with the ‘U’ bolt placed on the unloaded end of the rope, and each nut tightened evenly in turn to achieve the recommended torque settings. After installation, torque should be re-checked after 24 hours, again after the first application of load, and periodically during service.

Key features

• Suitable for 11mm wire rope
• DIN741 commercial wire rope grip design
• Galvanised finish
• Quantity: 10
• Product code: SFCOMMG11
• Weight: 0.62kg

Sizing

• A: 23mm
• B: 11.5mm
• C: 19mm
• D: 8mm
• E: 44mm
• F: 18mm
• G: 36mm

Safety information

• Grease the threads on the nuts and bolts before fitting
• Keep spacing between grips at least 6 times the diameter of the rope
• Fit with the ‘U’ bolt on the unloaded end of the rope
• Tighten each nut evenly and in turn to reach the recommended torque settings
• Leave unused for 24 hours, then re-check torque and re-tighten if required
• After the first application of load, re-check torque and re-tighten if required
• During service, check torque periodically