12MM Wire Rope Grips x10 - DIN741 Galvanised Commercial Cable Bulldog Clip

Designed for secure wire rope terminations, the 12mm Galvanised Commercial Wire Rope Grip DIN741 from Rackhams is supplied in a quantity of 10 for consistent, repeat use across multiple fixings. Suitable for 12mm wire rope, these grips are commonly used when creating loops in wire rope, including applications aboard boats, in public areas and for yacht rigging.

A galvanised finish provides corrosion resistance, helping the grips perform reliably in demanding environments where exposure is a consideration.

Key features

• DIN741 commercial wire rope grips
• Suitable for 12mm wire rope
• Galvanised finish for corrosion resistance
• Pack quantity: 10
• Product code: SFCOMG12
• Product weight: 1.14KG

Sizing

• A: 21.5mm
• B: 13mm
• C: 22mm
• D: 10mm
• E: 56mm
• F: 21mm
• G: 41mm

Care

Prior to fitting, ensure the threads on the nuts and bolts are well greased.

Safety information

• Space grips at least 6 times the diameter of the rope
• Fit with the ‘U’ bolt on the unloaded end of the rope and keep orientation correct
• Tighten each nut evenly and in turn to achieve the recommended torque settings
• Leave unused for 24 hours, then re-check torque settings and re-tighten if required
• After the first application of load, re-check torque settings and re-tighten if required
• During service, periodically check torque settings