50MM Wire Rope Grips X2 - DIN741 Commercial Bulldog Clip

Designed for dependable wire rope terminations, the SFCOMG50 galvanised commercial Wire Rope Grip (DIN741) is supplied as a quantity of 2 and suits 50mm wire rope. Commonly used to create loops in wire rope, it’s a practical choice for applications including boats, public areas and yacht rigging, where a secure grip and consistent fitting matter.

Finished in galvanised coating for excellent corrosion resistance, these grips are intended to be fitted with care to achieve the correct orientation and torque. For best results, follow the recommended spacing and re-check tightening after initial installation and loading.

Key features

• DIN741 commercial wire rope grip
• Suits 50mm wire rope
• Galvanised finish for corrosion resistance
• Quantity: 2
• Product code: SFCOMG50
• Product weight: 3.34kg

Sizing

• A: 65mm
• B: 51mm
• C: 51mm
• D: 17mm
• E: 154mm
• F: 62mm
• G: 105mm

Care

Prior to fitting, grease the threads on the nuts and bolts. Tighten each nut evenly to the recommended torque settings, then re-check and re-tighten after 24 hours, after the first load application, and periodically during service.