ATEK 60cm Monobloc Kitchen Tap Flexible Hose Connectors 10mm x 18.6mm Flexi Tails Pair

From ATEK, this pair of monobloc tap hose connectors is designed for compatible kitchen mixer and basin mixer tap installations where extra reach is needed beneath the sink. Each flexible hose measures approximately 60cm, making them a practical choice when the tap connection and water supply are positioned further apart.

The metal-braided outer covering supports flexible routing around existing pipework, while red and blue tracer markings provide a clear visual reference when organising hot and cold connections. Each hose is finished with an approximately 10mm male threaded end with a rubber O-ring and an approximately 18.6mm female hexagonal connector at the opposite end. Supplied as a matching pair, they are suitable for compatible replacement or new installations.

Key features

• Supplied as a matching pair
• Approximately 60cm hose length per connector
• Approximately 10mm male threaded end with rubber O-ring
• Approximately 18.6mm female hexagonal connector
• Metal-braided flexible outer construction
• Red and blue tracer markings for hot and cold identification
• Suitable for compatible monobloc kitchen mixer and basin mixer taps
• Designed for under-sink plumbing installations

Sizing

• Hose length: approx. 60cm
• Male threaded connection: approx. 10mm
• Female connection: approx. 18.6mm

Care

Install without crushing, twisting or sharply bending the hose. Keep away from sharp edges and avoid creating unnecessary tight loops.

Safety information

• Always verify the actual hot and cold plumbing connections before final installation rather than relying solely on the coloured tracers
• Do not stretch, kink, twist or sharply bend the hose

Rackhams Reference : HGVNIAQCGB