ATEK 90cm Monobloc Kitchen Tap Flexible Hose Connectors 10mm x 18.6mm Flexi Tails Pair

From ATEK, this pair of monobloc flexible tap hose connectors is designed for compatible kitchen mixer and basin taps where extra reach is needed beneath the sink. Each hose measures approximately 90cm long, making them a practical choice when the tap and water supply connections are positioned further apart.

The flexible metal-braided construction helps with routing around suitable plumbing components, while red and blue tracer markings provide a clear visual reference for hot and cold connections. Each connector is finished with an approximately 10mm male threaded end with a rubber O-ring, and an approximately 18.6mm female hexagonal connector at the opposite end. Suitable for replacement use or new compatible installations, they are supplied as a matching pair for hot and cold water connections.

Key features

• Supplied as a matching pair
• Approximately 90cm hose length per connector
• Approximately 10mm male threaded connection with rubber O-ring
• Approximately 18.6mm female hexagonal connection
• Flexible metal-braided outer construction
• Red and blue tracer markings for hot and cold identification
• Suitable for compatible monobloc kitchen mixer and basin taps
• Designed for under-sink routing in compatible installations

Sizing

• 90cm hose length
• Approximately 10mm male connection
• Approximately 18.6mm female connection

What's included

2 x flexible tap hose connectors

Please note

Please compare the 90cm length, 10mm male connection and 18.6mm female connection with your existing installation before ordering.

Care

• Do not stretch the hose between fittings
• Avoid unnecessary tight loops where excess hose length is present
• Do not kink, twist, crush or sharply bend the hose
• Keep the braided hose away from sharp edges that could cause abrasion or damage

Rackhams Reference : JGP7CCJPX4