Fixaball Auger Drill Bit High Quality All Sizes All Woods 6mm-32mm

For drilling wood, this Fixaball auger drill bit is made from high speed steel and features two twisting flutes for smooth material removal. A spiral end helps draw the bit through the timber, while the sharpened spiral edge supports a clean-cut hole edge.

Suitable for a range of wood drilling tasks, it is available in multiple diameter and length options with a hex shank configuration.

Available options

• 6mm x 230mm
• 8mm x 230mm
• 8mm x 460mm
• 10mm x 230mm
• 10mm x 460mm
• 12mm x 230mm
• 12mm x 460mm
• 13mm x 230mm
• 14mm x 230mm
• 14mm x 460mm
• 16mm x 230mm
• 16mm x 460mm
• 18mm x 230mm
• 18mm x 460mm
• 19mm x 230mm
• 20mm x 230mm
• 20mm x 460mm
• 22mm x 230mm
• 25mm x 230mm
• 25mm x 460mm
• 28mm x 230mm
• 30mm x 230mm
• 32mm x 230mm

Key features

• High speed steel construction
• Two twisting flutes
• Hex shank
• Spiral end to guide the bit through wood
• Sharp spiral edge for a clean-cut hole edge

Care and maintenance

• Store drill bits separately to prevent them knocking into each other.
• Use a slow drill speed and carry out a practice run before drilling.
• Centre punch the marked hole position to guide the bit accurately.
• Hold the material securely before drilling.
• Drill at 90' to the surface of the material.
• For a clean exit hole, secure material on the exit hole face.

Safety information

• Wear goggles and protective clothing.
• Do not wear gloves.
• Filter dust and wear a face mask as much as possible.

Rackhams Reference : S89DLPSNWP