Fixaball M10 Drop In Masonry Concrete Anchor Zinc

For flush-fit anchoring in solid concrete and masonry, this Fixaball drop in anchor features an M10 internal thread and a zinc-plated finish. It provides an internally threaded socket for use with bolts or threaded rod, with no protrusion when left unused.

Suitable for fixing into masonry, brick, concrete and non-porous stone, it is used across mechanical and electrical services, suspension systems, cable trays, signs and hand rails. The anchor remains in place when the fixture is removed, and full expansion is achieved with the correct shouldered setting punch.

Key features

• Internal thread diameter: M10
• Zinc plated
• Suitable for masonry, brick, concrete and non-porous stone
• For use with bolts or threaded rod
• Flush fitting with no protrusion when not in use
• Permanent anchorage point in solid concrete, brick or masonry

Specifications

• Anchor hole size: 12mm
• Minimum hole depth: 40mm
• Internal thread length: 15mm
• Masonry drill diameter: 12
• Hole depth: 42
• Minimum screw embedment: 17

Sizing

• Anchor length: 40mm

Safety information

• All specifications are true with correct installation.
• Use the correct shouldered setting punch to achieve full expansion.

Rackhams Reference : DH941GWBHT