Fixaball M8 Drop In Masonry Concrete Anchor Zinc

For flush fixing into solid concrete and other dense masonry, the Fixaball M8 drop in anchor provides an internally threaded zinc plated expansion anchor for use with bolts or threaded rod. It suits masonry, brick, concrete and non-porous stone, with a shallow embedment that reduces drilling depth and leaves no protrusion when the fixing is not in use.

This anchor is suitable for mechanical and electrical services, suspension systems, cable trays, signs and hand rails. Once the fixture is removed, the anchor remains in place as a permanent anchorage point.

Key features

• Internal thread diameter: M8
• Zinc plated
• Internally threaded socket anchor
• Suitable for masonry, brick, concrete and non-porous stone
• Suitable for use in solid concrete
• Compatible with bolts or threaded rod of any length

Specifications

• Anchor hole size: 10mm
• Anchor minimum length: 30mm
• Minimum hole depth: 30mm
• Internal thread length: 14mm
• Masonry drill diameter: 10
• Hole depth: 32
• Minimum screw embedment: 13

Sizing

30mm

Safety information

• Use the correct shouldered setting punch to achieve full expansion.
• Drill the hole with a hammer drill and a carbide tipped masonry drill bit matched to the outside diameter of the anchor.
• Clear all debris from the hole before installation.
• Tighten to the recommended torque using a torque wrench.

Rackhams Reference : N4TPFEDXG1