Fixaball M14 Concrete Anchor Screw Hex Self Tapping High Tensile BZP

For masonry and concrete fixings, the Fixaball M14 concrete anchor screw is a self tapping hexagon head anchor with a zinc plated finish. This non-expansion fixing suits medium duty anchoring into concrete, brick, stone, wood and concrete block, while allowing adjustment or removal after installation for accurate positioning.

The concave thread cuts its own thread during installation for low torque fixing and pull out resistance. A 14mm shank fits a 14mm hole, with a 16mm self tapping thread. Installation requires drilling the correct hole, clearing dust and debris, and tightening with a socket wrench or hexagon adapter. The hole depth should be over-drilled by 10/20mm.

Available options

• 14mm x 75mm
• 14mm x 100mm
• 14mm x 130mm
• 14mm x 150mm
• 14mm x 200mm

Key features

• Diameter: 14mm shank with 16mm self tapping thread
• Finish: zinc plated
• Hexagon head
• Non-expansion anchor
• Suitable for concrete, brick, stone, wood and concrete block

Safety information

• Do not apply stress or load to the concrete screws until the concrete has fully cured.
• Use an additional washer to spread the load of the fixing.

Rackhams Reference : 1A7ZCWCED4