Fixaball M6 Drop In Anchor Lipped Masonry Concrete

For flush-set fixings in solid masonry, the Fixaball M6 lipped drop in anchor provides an internally threaded expansion anchor for use in concrete, brick and non-porous stone. The zinc finish and lipped design allow the anchor to sit flush with the surface, helping to prevent over-insertion.

Suitable for use with bolts or threaded rod of any length, it can be set independently of hole depth and used in non-cracked concrete. Typical applications include mechanical and electrical services, suspension systems, cable trays, signs and hand rails.

Key features

• Internal thread: M6
• Zinc finish
• Lipped drop in expansion anchor
• Suitable for masonry, concrete, brick and non-porous stone
• Compatible with bolts or threaded rod of any length
• Can be used in non-cracked concrete

Specifications

• Anchor hole size: 8mm
• Anchor length: 25mm
• Minimum hole depth: 10mm
• Anchor minimum length: 25
• Internal thread length: 10
• Masonry drill diameter: 8
• Hole depth: 26
• Minimum screw embedment: 11

Sizing

• Anchor hole size 8mm
• Anchor length 25mm
• Minimum hole depth 10mm

Safety information

• Use a hammer drill and a carbide tipped masonry drill bit matched to the outside diameter of the anchor.
• Clear the hole of debris before installation.
• Use the correct shouldered setting punch to achieve full expansion.
• Tighten to the recommended torque using a torque wrench.

Rackhams Reference : U3QSS8LJM9