Motul 7100 10W-40 4T Fully Synthetic Motorcycle Engine Oil API SP JASO MA2 1L

Motul 7100 10W-40 4T motorcycle engine oil is supplied in a 1L bottle and uses a fully synthetic ester formulation for high-performance four-stroke motorcycles. Developed for road and off-road use, it is intended for sport and adventure riding where SAE 10W-40 oil is recommended by the manufacturer.

This lubricant is suitable for motorcycles with or without an integrated gearbox and is compatible with wet or dry clutch systems. It is also suitable for motorcycles fitted with catalytic converters and secondary air injection. Additional stated applications include ATVs, UTVs, side-by-sides, personal watercraft and snowmobiles, provided the manufacturer recommends SAE 10W-40 oil and the applicable specifications.

Key features

• 1L volume
• 100% synthetic ester formulation
• SAE 10W-40 viscosity
• Suitable for motorcycles with or without an integrated gearbox
• Compatible with wet or dry clutch systems
• Suitable for motorcycles fitted with catalytic converters and secondary air injection
• Can be mixed with synthetic or mineral lubricants

Specifications

• Colour: Red
• Density at 20C: 0.853
• Viscosity at 40C: 85.8 mm²/s
• Viscosity at 100C: 13.2 mm²/s
• HTHS viscosity at 150C: 3.8 mPa·s
• Viscosity index: 155
• Pour point: −30C
• Flash point: 246C
• Oil change interval: Up to 16,000 km, depending on the manufacturer’s recommendation and vehicle use

Compliance and regulatory information

• API SP
• JASO MA2 (2023)

Safety information

Always check the vehicle manufacturer’s requirements before use.

About this product

Who is it for

Suited to riders of high-performance four-stroke motorcycles, including sport and adventure bikes, where SAE 10W-40 oil is recommended by the manufacturer.

When and where to use it

Suitable for road and off-road use, including demanding riding conditions and applications where engine, gearbox and clutch compatibility are required.

Rackhams Reference : KEX3DTNSBS