Motul 8100 Eco-Clean 0W-30 Fully Synthetic Engine Oil ACEA C2 ILSAC GF-6A

MOTUL 8100 Eco-Clean 0W-30 is a synthetic technology engine oil formulated for gasoline and diesel engines requiring an ACEA C2 low-SAPS lubricant in 0W-30 viscosity. It is suitable for modern Euro 4, Euro 5 and Euro 6 engines, including vehicles fitted with DPF (Diesel Particulate Filter) and catalytic converters.

This mid SAPS formulation is compatible with engines using biofuels and ethanol blends, and is intended for applications where manufacturer approvals such as Ford WSS-M2C950-A, BMW Longlife-12 FE and Mercedes-Benz MB 229.61 are specified. It also meets API SP and ILSAC GF-6A requirements.

Key features

• Synthetic technology mid SAPS formulation
• SAE 0W-30 viscosity grade
• Suitable for gasoline and diesel engines equipped with DPF and catalytic converters
• For modern Euro 4, Euro 5 and Euro 6 engines
• Meets ACEA C2, API SP and ILSAC GF-6A requirements
• Compatible with engines using biofuels and ethanol blends

Specifications

• Density at 20C: 0.842
• Viscosity at 40C: 50.8 mm²/s
• Viscosity at 100C: 9.9 mm²/s
• HTHS viscosity (150C): 3.1 mPa.s
• Viscosity Index: 185
• Pour point: -42C / -44F
• Sulphated Ash: 0.77% wt (Mid SAPS)
• TBN: 9.5 mg KOH/g
• Flash point: 238C / 460F

Vehicle compatibility

• Ford
• BMW
• Mercedes-Benz
• Fiat
• Honda
• Toyota
• Subaru
• Suzuki

How to use

• Follow manufacturer’s recommended drain intervals
• Do not mix with oils not meeting ACEA C2 specification
• Always check the vehicle handbook for the correct specification before use

Compliance and regulatory information

• Meets API SP / ILSAC GF-6A requirements
• OEM compatibility: Ford WSS-M2C950-A
• OEM compatibility: BMW Longlife-12 FE
• OEM compatibility: Mercedes-Benz MB 229.61
• OEM compatibility: Fiat 9.55535-GS1 / DS1
• OEM compatibility: Chrysler MS-13340 / MS-90047

Safety information

• Do not mix with oils not meeting ACEA C2 specification
• Always check the vehicle handbook for the correct specification before use

About this product

Who is it for

Suited to drivers of modern gasoline and diesel vehicles with Euro 4, Euro 5 or Euro 6 engines that require an ACEA C2 0W-30 lubricant, including engines fitted with DPF and catalytic converters.

When and where to use it

Suitable for routine engine servicing where the vehicle manufacturer specifies a low-SAPS 0W-30 oil meeting the stated industry standards or OEM approvals.

Rackhams Reference : TEGLBHBVUV