Oakcrafts Osmo Wood Wax Finish - Walnut 3166

For coloured wood protection with a natural-looking finish, Osmo Wood Wax Finish in Walnut 3166 combines oil and wax to treat the surface while enhancing the grain and texture of the wood. This Oakcrafts finish gives wood a warm walnut tone and leaves a breathable finish that does not form a thick or brittle surface film.

Suitable for interior and exterior use, it penetrates the wood to help protect from within. The finish is water-repellent, resistant to dirt and grime, and formulated with low VOC content. Applied in thin, even coats to clean, sanded wood, it can be built up with a second coat for fuller coverage and a richer result.

Key features

• Wood wax finish in Walnut 3166
• Combines the qualities of wax and oil
• Suitable for interior and exterior use
• Water-repellent finish
• Resistant to dirt and grime
• Breathable formula
• Low VOC content

Care and maintenance

• Clean and sand the wood surface before application.
• Apply a thin, even coat with a brush or lint-free cloth.
• Apply a second coat after drying for fuller protection and a richer finish.
• Maintain the finish with Osmo recoat products to keep the surface protected over time.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : QGKU62YB3J