S-FIXX No Gun Adhesive, Sealant & Wall Filler – 3-in-1 Grab Adhesive 2 Pack

S-BOND is a 3-in-1 hybrid polymer product that combines adhesive, sealant and filler functions in one formula. Suitable for a wide range of DIY and trade applications, it can be used in wet conditions and even underwater, making it a practical choice for areas exposed to moisture.

Once cured, it provides a bonding force of up to 100kg and can be painted over with any type of paint, including water-based paint. The formula is also stated to resist shrinkage, cracking and mould. This 2 pack uses a pressurised canister format, so no mastic gun is required.

Key features

• 3-in-1 adhesive, sealant and filler
• Pack quantity: 2 pack
• Suitable for use in wet conditions and underwater
• Bonding force: up to 100kg once cured
• Paintable with any type of paint, including water-based paint
• Low VOC
• Made in the UK

Specifications

• Curing time: approximately 24hrs per 1.5mm bead
• Application format: pressurised canister
• No mastic gun required

Care and maintenance

• Prepare the surface properly and ensure it is structurally sound before application.
• On woods with oil-based additives or pressure-treated timber, adhesion may be reduced.
• Some plastics with a high oil content may prevent proper bonding.
• Sand the surface thoroughly to create a keyed, roughened finish where improved adhesion is needed.
• After use, leave around 1cm protruding from the end of the nozzle so it can be removed for reuse up to 3 months after opening.
• Clean sealed shower and bath areas periodically, as soap scum can build up on the surface.

Safety information

• Carry out a small test patch first and allow it to fully cure before applying across the full area.
• For heavy items with poor contact surface area, use a mechanical fixing or heavy-duty tape to hold the item in place while curing takes effect.

Rackhams Reference : LLP5MYVQNM