x4 16MM DIN1142 Wire Rope Grips Zinc Plated - Cable Clamp Fixing Bulldog Lifting

Designed for rigging and lifting assemblies, these DIN1142 wire rope grips provide a practical way to form secure loops or create a temporary join in wire rope setups. This set includes 4 zinc plated grips sized to suit 16mm wire rope, making them suitable for use on board boats in a rigging arrangement, as well as similar applications on land. Manufactured from mild steel with a zinc coating for corrosion resistance, they are intended for assemblies designed for lifting purposes and should be installed by a qualified person.

For best results, grease the threads on the nuts and bolts before fitting, keep spacing between grips at least 6 times the rope diameter, and ensure correct orientation with the U-bolt placed on the unloaded end of the rope. Tighten each nut evenly in turn to the recommended torque settings, then re-check after 24 hours, after the first application of load, and periodically during service.

Key features

• DIN1142 wire rope grips for forming loops or temporary joins
• Suitable for 16mm wire rope
• Zinc plated finish
• Manufactured from mild steel with a zinc coating for corrosion resistance
• Suitable for rigging setups on boats and similar applications on land
• Quantity: 4

Sizing

• A: 39mm
• B: 20.5mm
• C: 32mm
• D: 13.5mm
• E: 75mm
• F: 35mm
• G: 64mm

Safety information

• For lifting assemblies, installation should be carried out by a qualified person
• Grease the threads on nuts and bolts prior to fitting
• Space grips at least 6 times the diameter of the rope
• Fit with correct orientation: place the U-bolt on the unloaded end of the rope
• Tighten nuts evenly and in turn to the recommended torque settings
• Re-check torque after 24 hours, after the first application of load, and periodically during service; re-tighten if necessary

Please note: Colours may appear slightly different in person than on your screen.

Rackhams Reference : 7S8HF5YH4U