14MM Wire Rope Grips x10 - DIN741 Galvanised Commercial Cable Clamp

Designed for rigging and general wire rope assemblies, the SFCOMG14 from Rackhams is a pack of 10 DIN741 commercial wire rope grips, sized to suit 14mm wire rope. Finished in galvanised mild steel, they’re intended for applications on board boats or similar uses on land where a secure, practical connection is required.

Commonly used to form loops in a rope assembly or to create a temporary join, each grip should be fitted with care to ensure correct orientation and consistent tightening. For best results, grease the threads before fitting, tighten the nuts evenly in turn to the recommended torque settings, then re-check and re-tighten as required after 24 hours, after the first load application, and periodically during service.

Key features

• DIN741 commercial wire rope grips
• Suitable for 14mm wire rope
• Galvanised finish
• Material: mild steel with a galvanised coating
• Designed for forming loops or temporary joins in wire rope assemblies
• Suitable for rigging setups on boats and similar land-based applications
• Pack quantity: 10
• Product code: SFCOMG14

Sizing

• A: 31mm
• B: 12mm
• C: 22mm
• D: 10mm
• E: 55mm
• F: 21mm
• G: 41mm