Fixaball Chemical Anchor Resin Capsules Hammer in ETA Approved

For stud and re-bar fixings, Fixaball hammer in chemical resin capsules provide a single-capsule anchoring solution with no mixing, no waste and no mess. These ETA Approved epoxy acrylate capsules are suited to smaller fixing jobs, overhead anchoring and close edge fixing, and are used for structural steel columns, beams, machinery hold down, handrails, balustrades and safety barriers.

Each capsule contains the resin and hardener required for installation. When the threaded rod or bar is twisted into the pre-drilled hole, the capsule breaks and the contents combine to form the anchor. Full boxes only are supplied, with pack quantities varying by size.

Key features

• ETA Approved
• Epoxy acrylate chemical resin capsules
• One capsule per hole
• No mixing, no waste and no mess
• Quick-setting for stud and re-bar fixings
• Suitable for overhead anchoring and close edge fixing
• Supplied in full boxes only

Specifications

• 10mm Hammer In Capsules Epoxy Acrylate: 10 per box
• 12mm Hammer In Capsules Epoxy Acrylate: 10 per box
• 16mm Hammer In Capsules Epoxy Acrylate: 10 per box
• 20mm Hammer In Capsules Epoxy Acrylate: 6 per box
• 24mm Hammer In Capsules Epoxy Acrylate: 6 per box

Sizing

• 8mm stud / 10 anchor hole diameter / 80mm capsule length / 10 per box
• 10mm stud / 13 anchor hole diameter / 90mm capsule length / 10 per box
• 12mm stud / 15 anchor hole diameter / 110mm capsule length / 10 per box
• 16mm stud / 20 anchor hole diameter / 125mm capsule length / 10 per box
• 20mm stud / 25 anchor hole diameter / 175mm capsule length / 6 per box
• 24mm stud / 30 anchor hole diameter / 210mm capsule length / 6 per box
• 30mm stud / 38 anchor hole diameter / 265mm capsule length / 6 per box

Safety information

• Return any capsules that do not flow, as the hardener and resin have already mixed.

Rackhams Reference : 3I31HUAWGX