Fixaball Countersunk Concrete Masonry Anchor Screw 6mm Torx BZP JCP

For medium-duty anchoring, the Fixaball JCP Anker Bolt combines a 6mm concrete screw body with an 8mm thread in a zinc/BZP plated finish. This self tapping masonry and concrete anchor screw has a Torx countersunk head and a concave thread form that cuts its own thread into the pre-drilled hole.

Suitable for use in concrete, brick, stone, wood and concrete block, it provides a non-expansion fixing that can also be adjusted or removed after installation. The M6 bolt requires a 6mm masonry drill bit, and installation uses a T30 drill driver bit. Available lengths are 30mm, 50mm, 75mm and 100mm.

Key features

• 6mm diameter
• 8mm thread
• Zinc/BZP plated finish
• Torx countersunk head
• Self tapping concrete and masonry anchor screw
• Suitable for concrete, brick, stone, wood and concrete block
• M6 bolt requires a 6mm masonry drill bit

Specifications

• T30 drill driver bit required
• Non-expansion anchor
• Always over drill the hole depth by 10/20mm

Available options

• 6mm x 30mm
• 6mm x 50mm
• 6mm x 75mm
• 6mm x 100mm

Safety information

• Do not put any stress or load onto the concrete screws until the concrete has fully cured.

Rackhams Reference : 7CP9BSTHWX