Fixaball M8 Socket Screw Countersunk High Tensile 10.9 DIN7991

For flush-fitting fastening, these Fixaball M8 socket countersunk screws are made from high tensile steel, grade 10.9, and produced to DIN 7991. Each screw has an Allen/hexagon socket drive and a countersunk flat head for a level finish when fully tightened.

These M8 fasteners are available in a wide range of lengths, with fully threaded options throughout most sizes and partially threaded options in selected lengths. The stated length of a countersunk fixing is measured from the tip to the top.

Key features

• M8 thread
• Allen/hexagon socket drive
• Countersunk flat head
• High tensile steel, grade 10.9
• Self-colour/black finish
• DIN 7991
• Low corrosion resistance without further surface treatment

Available options

• M8-1.25 x 10 MM, fully threaded
• M8-1.25 x 12 MM, fully threaded
• M8-1.25 x 14 MM, fully threaded
• M8-1.25 x 15 MM, fully threaded
• M8-1.25 x 16 MM, fully threaded
• M8-1.25 x 18 MM, fully threaded
• M8-1.25 x 20 MM, fully threaded
• M8-1.25 x 22 MM, fully threaded
• M8-1.25 x 25 MM, fully threaded
• M8-1.25 x 30 MM, fully threaded
• M8-1.25 x 35 MM, fully threaded
• M8-1.25 x 40 MM, fully threaded
• M8-1.25 x 45 MM, fully threaded
• M8-1.25 x 50 MM, fully threaded
• M8-1.25 x 60 MM, partially threaded
• M8-1.25 x 60 MM, fully threaded
• M8-1.25 x 70 MM, fully threaded
• M8-1.25 x 80 MM, fully threaded
• M8-1.25 x 90 MM, fully threaded
• M8-1.25 x 100 MM, fully threaded
• M8-1.25 x 110 MM, fully threaded
• M8-1.25 x 120 MM, fully threaded
• M8-1.25 x 140 MM, partially threaded
• M8-1.25 x 150 MM, partially threaded

Specifications

• Typical application: no exposure to moisture
• Typical application: often greased/oiled
• Length of countersunk fixing is measured from tip to top

Rackhams Reference : A6I4VADNU7