Fixaball M8 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor
Fixaball M8 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor
Fixaball M8 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor
Fixaball M8 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor

Fixaball M8 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor

From £5.02

Delivery

Fast & Free Delivery *

Rackhams Guarantee

Backed by the Rackhams Guarantee

Information

Easy Returns

  & UK Customer Support

Trophy

Rated Excellent by Customers on Google

For secure fixing into non-cracked concrete, masonry and non-porous stone, this Fixaball M8 throughbolt provides a torque controlled anchor with a hot dip galvanised finish. It is suitable for use in concrete over C20/25 and can be passed through the fixture once the fixing position has been set.

The cold formed body supports consistent dimensional accuracy and material stability. Reduced embedment suitability helps avoid contact with rebars or reinforcement cages where required.

Key features

  • M8 throughbolt expansion anchor
  • Hot dip galvanised finish to a minimum of 45 microns
  • Suitable for non-cracked concrete, masonry, brick, blocks and non-porous stone
  • Suitable for use in concrete over C20/25
  • Torque controlled anchor

Specifications

  • Installation temperature range for base material: -5 / + 40 ºC
  • 80 ºC for a short period of time
  • Anchor hole size: 8mm
  • Hole diameter: 9

Available options

  • 50mm
  • 75mm
  • 95mm
  • 120mm

Sizing

  • Anchor length 50mm
  • Anchor length 75mm
  • Anchor length 95mm
  • Anchor length 120mm

Safety information

  • Check the concrete strength before installation to ensure the class is suitable.
  • The concrete base must be compact with insignificant porosity.
  • Minimum installation depth values must always be respected for anchor depth, anchor-to-anchor distances and anchor-to-edge distances.
  • Drill to the specified minimum depth and diameter, perpendicular to the base material surface.
  • Take special care when drilling near reinforcement areas to avoid damage.
  • Clean holes thoroughly to remove dust and debris with a suitably sized brush.
  • When temperature is below 0ºC, ensure water does not seep into the hole.
  • Do not apply any intermediate layer between the material to be fixed and the washer, including sealing products.
  • Apply the specified torque with a torque wrench.
  • If holes in the material to be fixed are larger than required, a thicker washer of bigger diameter is necessary.

Rackhams Reference : WWJU66VFZ8

Diameter

8mm

Colour

Silver

Material

Galvanised Steel

Suitable For

Concrete

This product is supplied by one of our approved partners.

Rackhams brings together a curated group of trusted partners so you can shop a wider range of premium products in one place — all backed and guaranteed by Rackhams.

We remain your single point of contact for every order, managing your experience from checkout through to delivery and after-sales support.

Learn more about the Rackhams Guarantee.

You may also like these