T-Mech 4 Stroke Post Driver

From T-Mech, this 4-stroke Petrol Post Driver/Jack Hammer is built for fast, high-impact driving of posts, stakes and pegs. With an impact frequency of 700~1350 rpm, it helps take the strain out of fencing and ground-setting jobs, making it a practical choice for installing fence posts, signs and similar fixtures.

A 37.7cc single-cylinder, air-cooled engine delivers up to 900W (1.2HP) at 6500r/min, while side handles are designed to give you complete control during operation. For easier transport and storage, it comes with a heavy duty plastic carry case with wheels, alongside a selection of socket retainers and attachments to suit different post sizes.

Key features

• High impact hammer action of 700~1350 rpm
• 37.7cc single-cylinder, air-cooled, 4-stroke petrol engine
• Up to 900W (1.2HP) / 6500r/min maximum power and speed
• Side handles for controlled operation
• Hand-Arm Vibration rating of 13m/s2
• Includes different size socket retainers

Specifications

• Engine: XY139-F petrol engine
• Fuel: 86 octane unleaded petrol or higher
• Max torque & speed: 1.3(ft/lb)/5500(r/min)
• Carburettor type: H129-1C4/H629-1C4
• Fuel consumption rate: ≤ 0.9L/h
• Oil tank capacity: 0.08L
• Fuel tank capacity: 0.65L
• Impact energy: up to 41 ft lbs
• Spark plug type: CMR6A
• Starter system: hand pull start
• Weight: 21.9Kg

Sizing

• 0.32m / 32cm / 12.6” W
• 0.30m / 30cm / 11.8” D
• 0.81m / 81cm / 31.9” H

What's included

• 4 attachments (100mm aluminium, 70-80mm, 50-69mm and 20-49mm in plastic)
• Different size socket retainers
• Tube of grease
• Tool kit for assembly
• Heavy duty plastic carry case with wheels

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : CFD9B5MCMI