T-Mech Earth Auger & 2-Stroke Post Driver

From T-Mech, this Earth Auger and 2-stroke Post Driver set is designed to take on demanding outdoor ground work, from drilling holes to driving posts, stakes and pegs into place. The Earth Auger pairs a 3 HP motor with three drill sizes, helping you dig to the depth you need with less manual effort.

Once holes are prepared, the Petrol Post Driver takes over with a 32.7cc single-cylinder, 2-stroke engine and an impact frequency of 1700~2230 bpm. With an attachment diameter of up to 65mm, it’s suited to a range of post sizes, while the specified impact energy of 25–45J supports consistent driving performance. A carry case and tool kit are included to help you get started and maintain your equipment.

Key features

• Earth Auger power: 3 HP, 9000 RPM
• Earth Auger drill diameters: 4, 6 and 8inch
• Earth Auger rotary speed: 170–200 RPM
• Post Driver engine: 32.7cc single cylinder, 2 stroke
• Post Driver impact frequency: 1700~2230 bpm
• Post Driver attachment diameter: up to 65mm
• Includes carry case and tool kit

Specifications

• Post Driver weight: 14.7kg
• Post Driver fuel: oil mix 40:1
• Post Driver spark plug type: L6T
• Post Driver impact energy: 25-45J
• Post Driver fuel tank capacity: 0.9L
• Post Driver fuel consumption rate: ≤ 0.5L/h
• Post Driver max torque & speed: 1.45N.m 5000 rpm
• Post Driver carburettor type: Diaphragm 1 E36F-2A.1
• Post Driver max power & speed: 900W (1.2HP) 6500 rpm
• Earth Auger tank size: 1.2 Litre
• Earth Auger fuel: 2 stroke oil mix 25/1
• Earth Auger weight: 8.6 Kg (including drill)

Sizing

• Post Driver height: 568mm / 56.8cm / 22.4” (+3.5cm with attachment)
• Post Driver width: 280mm / 28cm / 11”
• Post Driver depth: 375mm / 37.5cm / 14.8”
• Earth Auger height: 1150mm / 115cm / 45.3” (+58cm when extended)
• Earth Auger width: 530mm / 53cm / 20.9”
• Earth Auger depth: 260mm / 26cm / 10.2”

Rackhams Reference : ZVMX7LANIM