T-mech Earth Auger and 4 Stroke Post Driver

From T-Mech, this Earth Auger and 4-stroke Post Driver set brings two heavy-duty tools together for demanding outdoor ground work. Use the Earth Auger to bore holes with a 3HP motor, then switch to the petrol Post Driver to drive posts, stakes and pegs into place with less effort.

The Post Driver runs on a 37.7cc, single-cylinder, air-cooled, 4-stroke XY139-F petrol engine with a hand pull start, while the Earth Auger features a 1.2 litre tank and operates with a 2-stroke oil mix (25/1). A carry case, tool kit and grease are included to help you get started and maintain your equipment.

Key features

• Earth Auger power: 3HP, 9000 RPM
• Earth Auger rotary speed: 170–200 RPM
• Earth Auger drill diameters: 4, 6 and 8 inch
• Post Driver engine: 37.7cc, 4-stroke XY139-F petrol engine
• Post Driver max power and speed: 900W (1.2HP) / 6500r/min
• Post Driver impact frequency: 700–1350 rpm
• Post Driver attachments: 1 plastic, 3 aluminium
• CE approved

Sizing

• Post Driver: 0.32m W x 0.30m D x 0.81m H
• Earth Auger: 530mm W x 260mm D x 1150mm H (+58cm when extended)

What's included

• Carry case
• Tool kit
• Grease

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : 1ZPHLDHEY5