Fixaball 12mm Sleeve Masonry Anchors ZYP Nut Type

For secure fixing into masonry, brick, concrete and stone, these Fixaball sleeve masonry anchors are a zinc plated nut type expansion anchor with a 12mm diameter and M10 thread. The thin-walled sleeve suits use in concrete, stone, brickwork, perforated bricks and dense concrete blocks.

A diagonal slot allows the sleeve to pull down into small gaps as the nut is tightened, creating a positive clamping force through the fixture. Zinc plated construction is intended for dry conditions.

Available options

Lengths available: 60mm, 75mm, 100mm, 125mm.

Key features

• 12mm diameter
• M10 thread diameter
• Zinc plated finish
• Nut type sleeve masonry anchor
• Suitable for masonry, brick, concrete, stone, perforated bricks and dense concrete blocks

Specifications

• Anchor hole size: 12mm
• Fixture hole size: 15

Sizing

• 12 x 60
• 12 x 75
• 12 x 100
• 12 x 125

Care and maintenance

Use in dry conditions.

Safety information

• Using a zinc sleeve anchor in wet conditions will negatively affect reliability and can lead to earlier failure.
• Drill the correct size hole, clean the hole, place the anchor in the hole, then tighten the nut to set the anchor.
• Avoid over-tightening the nut.

Rackhams Reference : S895V8HSXF