Fixaball M12 Through Bolts Heavy Duty Masonry Anchor BZP ETA Approved

For concrete, masonry and non-porous stone fixings, the Fixaball M12 through bolt provides a heavy duty expansion anchor in a zinc finish. ETA Approved and suited to non-cracked substrates, it is used for securing materials to concrete, brick, block and stone where a through fixing is required.

The fixing passes through the fixture once positioned, with holes matching the anchor diameter. A cold formed body supports consistent dimensional accuracy and material stability, while reduced embedment suitability can help avoid contact with rebars or reinforcement cages.

Key features

• M12 through bolt
• Zinc finish
• ETA Approved
• Suitable for non-cracked concrete, masonry and non-porous stone
• Cold formed body
• Anchor hole size: 12mm

Specifications

• Installation temperature range for base material: -5 / + 40 ºC
• 80 ºC for a short period of time
• Hole diameter: 13
• Minimum installation depth values must always be respected for anchors’ depth, anchor-to-anchor distances and anchor-to-edge distances

Available options

• 80mm
• 90mm
• 100mm
• 110mm
• 120mm
• 140mm
• 160mm
• 180mm
• 200mm

Sizing

• Anchor hole size: 12mm
• Anchor length: 80mm
• Anchor length: 90mm
• Anchor length: 100mm
• Anchor length: 110mm
• Anchor length: 120mm
• Anchor length: 140mm
• Anchor length: 160mm
• Anchor length: 180mm
• Anchor length: 200mm

Safety information

• Check the concrete strength, grade and edge distance before installation to ensure the substrate is suitable.
• The concrete base must be compact and crack free.
• Minimum installation depth values must always be respected.

Rackhams Reference : XVRU8DVV1N