Fixaball 3.2mm Pop Rivets Domed A2/ 304 Stainless Steel ISO 15983A

For fastening from one side only, these Fixaball blind rivets combine a 3.2mm diameter with an A2/304 stainless steel body and a domed head. Manufactured to ISO 15983A, they are suited to applications where access is available from one side of the joint.

Each rivet is installed into a pre-drilled hole and set by drawing the mandrel into the rivet body, expanding the blind end before the mandrel snaps at its break point. A range of lengths is available to suit different grip ranges.

Available options

• 3.2 x 6
• 3.2 x 8
• 3.2 x 10
• 3.2 x 12
• 3.2 x 14
• 3.2 x 16
• 3.2 x 18
• 3.2 x 20
• 3.2 x 25

Key features

• Diameter: 3.2mm
• Material: A2/304 stainless steel
• Head style: Domed
• Type: Blind rivets
• Standard: ISO 15983A

Specifications

• Flange diameter: 6.4mm
• Flange thickness: 1mm
• Mandrel diameter: 1.8mm

Sizing

• 6mm rivet length; grip range 0.5 – 3
• 8mm rivet length; grip range 3 – 5
• 10mm rivet length; grip range 5 – 6.5
• 12mm rivet length; grip range 6.5 – 8.5
• 14mm rivet length; grip range 8.5 – 10.5
• 16mm rivet length; grip range 10.5 – 12.5
• 18mm rivet length; grip range 12 - 14
• 4mm rivet length; grip range 0.5mm-1.5mm; drill size 3.3mm
• 6mm rivet length; grip range 1.5mm-3.5mm; drill size 3.30mm
• 8mm rivet length; grip range 3.5mm-5mm; drill size 3.30mm
• 10mm rivet length; grip range 5mm-7mm; drill size 3.30mm
• 12mm rivet length; grip range 7mm-9mm; drill size 3.30mm
• 15mm rivet length; grip range 9mm-12mm; drill size 3.30mm
• 18mm rivet length; grip range 12mm-15mm; drill size 3.30mm
• 20mm rivet length; grip range 15mm-17mm; drill size 3.30mm

Safety information

• Non-locking mandrels may fall out under vibration or other conditions.
• These rivets are sometimes avoided for critical structural joints.

Rackhams Reference : 9PVTMLT6FV