Fixaball M8 Hex Concrete Anchor Screw Self-Tapping High Tensile BZP

For medium-duty fixings into masonry substrates, the Fixaball M8 hexagon head concrete anchor screw provides a self-tapping, non-expansion fixing. This zinc plated concrete screw has an 8mm shank, uses an 8mm hole, and features a 10mm self-tapping thread with a concave thread design for low torque installation and pull-out resistance.

Suitable for concrete, brick, stone, wood and concrete block, it can be adjusted or removed after fitting for accurate positioning. Installation is carried out with the correct masonry drill bit after clearing dust and debris from the hole, using a socket wrench or hexagon adapter.

Key features

• Diameter: 8mm shank
• Material and finish: zinc plated
• Hexagon head
• Self-tapping thread: 10mm total diameter including thread
• Non-expansion fixing
• Suitable for concrete, brick, stone, wood and concrete block

Specifications

• Masonry drill bit size: 8mm
• Socket size: 15mm
• Gauge is the diameter of the shank and not the total diameter including the thread

Safety information

• Over drill the hole depth by 10/ 20mm.
• Do not put any stress or load onto the concrete screws until the concrete has fully cured.
• Use an additional washer to spread the load of the fixing.

Rackhams Reference : ZTSRD5I5JZ